Lancer CK2A Replacement Shock Part #

[venum]

For those of u that need this info for your shock changes, here they are

I recorded these numbers from the shock change that I did on my CK2A earlier this year.


ORIGINAL MITSUBISHI LANCER CK2A (JDM SPEC) SHOCK ABSORBER REPLACEMENT


These are the numbers from the OEM shocks taken off the car, the original have KYB written on them:

MITSUBISHI STOCK PART # (KYB)

FRONT LEFT: MR316068 IL08 (Gas)

FRONT RIGHT: MR316067 IL07 (Gas)

REAR LEFT\RIGHT: MR403040 IL04 (Oil)


These are the Mitsubishi recommended OEM replacement

KAYABA OEM REPLACEMENT PART #
FROM KAYABA CATALOG (EXACT MATCH OF MITSUBISHI PART #)


FRONT LEFT: 332112 (Gas)

FRONT RIGHT: 332113 (Gas)

REAR LEFT\RIGHT: 341140 (Oil)


These are what I put on, since the ones that were OEM replacement (mentioned above) could NOT be sourced anywhere locally. I used these and they work EXACTLY like the original, measurement for measurement.

KAYABA REPLACEMENT THAT WILL WORK SAME AS OEM SPECIFIED

FRONT LEFT: 333288 (Gas)

FRONT RIGHT: 333289 (Gas)

REAR LEFT\RIGHT: 441085 (Oil)

As I mentioned above, I did this change above and it worked PERFECTLY.

The front (gas) That I got are KYB Excel-G (Pink Box)

The front (Oil) That I got are KYB Premium (Blue Box)

dunno why the ones that I got down here (not the OEM recommended) worked just as good and why I couldn't get the OEM. But thaz a diff story.

Thses are the numbers that I used.

Disclaimer: I hold no responsibility for any purchases made or any bad\wrong shocks bought\installed. Hell I hold no responsibility for anything you do after reading this. These are the numbers that I got and used and are working PERFECTLY on my car.


Recomended parts places:
(where I got mine)

Rear: Check's Motor Supplies, Cipero St. San Fernando

Front: El Socorro Auto Supplies, El Soccoro.

any further question, feel free to ask.
_________________


A Mitsubishi Whore, True to form and damm proud !