Joined: 07 Apr 2005 Posts: 1794 Location: Good question!
Posted: Fri Jul 08, 2005 7:11 pm Post subject: Evo 6 Sprint (558 hp 497 lb-ft) at play...
CPP Motor Developments' current toy -
Try these numbers on for size first - 558 hp & 497 lb-ft
This is one of the best prepared cars I ever saw.
"CPP�s latest project is now finished! After selling our last demo car we were left wondering what should take its place. Initial ideas were to build a 7RS sprint and hill climb car, but with the classic EVO 6 still being the most popular model with our customers we chose to build another 6. We were lucky to receive a phone call from Extreme Autos of Dudley where Colin Ward had just taken an EVO 6 RS sprint in px. A deal was quickly done for the 99 plate RS sprint no '00' - first of the RS sprint's built for their Managing Director�s personal use! With the lessons learned with our previous demo car we decided the only way to build this project was to start from a bare shell up. The RS was stripped of every last component, and nut, bolt and all under seal removed.
The bare shell was now in a fully stripped state and ready for a full safety devices grpA cage to be installed, this was then prepped and painted in CPP blue and the rest of the shell was given a fresh layer of white paint. We were now ready to start building the shell into a car.
Here is a run down of the cars current spec after winning the TOTB3 handling final with the quickest time of the day! and also being awarded the trophy for fastest Japanese car around the circuit!
Quote:
RUNNING GEAR
Hewland dog box ___________Kazz front & centre diff�s
Uprated rear RS diff ________Carbon twin plate clutch
BRAKES
Custom AP 6 pots front ______GrpA AP tarmac rears
Hydraulic handbrake ________Aeroquip lines thru out
SUSPENSION
Ohlins tarmac spec dampers __Safety devices grp A strut brace
CPP rear brace _____________Up rated bushing thru out
Cusco front & rear anti roll bars
ENGINE - 2.0 litre CPP engine running
Ross forged pistons ______________Oliver rods
CPP cams ______________________CPP head
Grp A big wing and baffled sump ___ARP head studs
ATP exhaust housing _____________GT30 turbo
Sub zero manifold _______________APS intercooler
Turbo smart external gate
Joined: 07 Apr 2005 Posts: 1794 Location: Good question!
Posted: Sun Jul 10, 2005 6:49 pm Post subject:
Ah tellin' yuh... Look they even paint underneath the floor-pan
... to a high gloss finish too...
One day I have to build a project to that standard... One Day Soon ... _________________ Walk softly... and carry a BIG stick!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum