NarendZORCE
Zorce Editor-in-Chief
Joined: 04 Apr 2005
Posts: 3137
Location: In Zorce, usually after the contents page
|
 Posted: Tue Jun 20, 2006 6:18 am Post subject: Rotary/RX7 Tidbits |
 |
|
The normal oil pressure in a stock Mazda rotary is approximately 71 psi above 3,000 RPM, (110 psi above 3,000 RPM in the 1993-95 RX-7) and should never drop below 15 psi at idle (use a 0 to 125 psi gauge). Normal oil temperature varies quite a bit depending on the operating conditions, but usually stabilizes between 140F and 200F. If the temperature exceeds 210F, reduce the load on the engine immediately or shut it off. Continued operation above 210F may damage the engine.
Source: http://www.racingbeat.com/FRmazda2.htm
Last edited by NarendZORCE on Tue Jun 20, 2006 6:47 am; edited 1 time in total |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
