View previous topic :: View next topic |
Author |
Message |
joashmgn Looking for the Jedi base
Joined: 04 Feb 2007 Posts: 26
|
Posted: Sat Jan 10, 2009 4:59 pm Post subject: 306 brake problem!.. |
|
|
Fellas... Braking problem with my pug... there's a horrible grinding noise coming from the front left of the car when braking... it's intermittent but happens more often than not...
NOONE has been able to diagnose the problem... Not even City Motors...
So... what I want to know is if any of you'll have had similar problems and have solved them or if not what brake setups have been used instead of the OEM setups...
Oh yeah... This problem has been happening for years but only recently have I been given the green light to begin my project... |
|
Back to top |
|
|
Plex Zorce Jedi Master
Joined: 01 May 2005 Posts: 9039 Location: T&T
|
Posted: Sun Jan 11, 2009 7:34 am Post subject: |
|
|
You want a private peugeot mechanic check it. |
|
Back to top |
|
|
joashmgn Looking for the Jedi base
Joined: 04 Feb 2007 Posts: 26
|
Posted: Sun Jan 11, 2009 1:04 pm Post subject: |
|
|
Wendell has checked it as well... Who would you recommend??? |
|
Back to top |
|
|
Plex Zorce Jedi Master
Joined: 01 May 2005 Posts: 9039 Location: T&T
|
Posted: Sun Jan 11, 2009 2:43 pm Post subject: |
|
|
You try Bailey or Sheldon. |
|
Back to top |
|
|
joashmgn Looking for the Jedi base
Joined: 04 Feb 2007 Posts: 26
|
Posted: Sun Jan 11, 2009 5:55 pm Post subject: |
|
|
Wasn't Bailey working at City Motors at a point in time???
And Sheldon is the same one from El Socorro??? |
|
Back to top |
|
|
solo Jedi Hopeful
Joined: 09 Nov 2005 Posts: 249
|
Posted: Mon Jan 12, 2009 9:12 am Post subject: |
|
|
What disc pads are you using?
I had a problem similar to this and it was because the disc pads were touching the outer edge of the rotor...that rough part. You can check this by checking the disc pad itself for lines on the outer edge. I just grinded off the offending edge of the pad with a grinder and that sorted out the problem. _________________ Ghetto Breed. |
|
Back to top |
|
|
joashmgn Looking for the Jedi base
Joined: 04 Feb 2007 Posts: 26
|
Posted: Mon Jan 12, 2009 4:11 pm Post subject: |
|
|
hmmmm... i'll check to see if it is rubbing... but I'm using OEM brake pads so that should not be the case... |
|
Back to top |
|
|
Plex Zorce Jedi Master
Joined: 01 May 2005 Posts: 9039 Location: T&T
|
Posted: Mon Jan 12, 2009 4:51 pm Post subject: |
|
|
joashmgn wrote: | Wasn't Bailey working at City Motors at a point in time???
And Sheldon is the same one from El Socorro??? |
Thats correct, so you did check them? |
|
Back to top |
|
|
joashmgn Looking for the Jedi base
Joined: 04 Feb 2007 Posts: 26
|
Posted: Tue Jan 13, 2009 9:36 am Post subject: |
|
|
yep... they both would have had input on the car...
as i said i only just got the green light to go ahead and work on it... basically it was handed over to me so I wasn't following the entire slew of maintainence that has been done... (car was in an accident etc.)
i do know that they would have had input though... but i guess it can't hurt to check them again or verify that information... |
|
Back to top |
|
|
Plex Zorce Jedi Master
Joined: 01 May 2005 Posts: 9039 Location: T&T
|
Posted: Tue Jan 13, 2009 9:49 am Post subject: |
|
|
True, hope you get through with the problem. |
|
Back to top |
|
|
|
|